Flexo Printing Machine for IML Label and Heat Transfer Films
Instruction:
1.Printing color: 6-10 colors (Arbitrarily increase or decrease ), for example: 8+0 7+1 6+2 5+3 4+4
2.Max. Mechanical Speed: 130m/min
3.Max. Printing Speed: 120m/min
4.Reticulated Rod: Ceramic Roller 8, closed scraper 8 sets
5.Accuracy of Registration: vertical ±0.25 mm( manual operation)
6.Broad wise: ±0.15 mm(manual operation)
7.Max. Diameter of Roll Material: Φ800 mm
8.Air shaft: φ76 mm(internal diameter)
9.Printing Pressure: Mechanical adjustment
10.Embossing roller: φ131.3 mm
11.Drying methods: electrical heating
12.Drying power: 36 KW
13.Fans : 45 W for 6 pcs, 750 W for 3 pcs, 370 W for 2 pcs
14.Main motor: 5.5 KW
15.Main inverter : TAIWAN DELTA
16.The ink motor: Synchronous motor transport ink
17.Normal bearing: Japan
18.Single bearing: Japan
19.Aluminium wheel: enable to oxidation and dynamic and static balance
20.E.P.C: full-automatic Servo control No carbon brush
21.Tension control system: magnetic powder for unwinding and rewinding tension control
22.Raise-drop version: the hydraulic raise-drop version
23.Electric: OMRON OR SCHNEIDER
24.Total power: 48 kw
25.Rang of printing length: 250 mm-900 mm
26.Plate thickness: 2.38 mm( both side adhesive included)
27.Max web width: 1000 mm
28.Printing width: 960 mm
29.Printing roller:one color one stick ,max printing length 300-400 mm
30.Substrates material: plastic, roll paper, non-woven fabric, IML Label and Heat Transfer Films.
Features
1. Easy operation, flexible starting, accurate color register.
2. Adopted motor, frequency control of motor speed, save electricity, Small fluctuation
3. When drop version ,automatically stop transported ink motor, it will automatically begin to Transport ink device when raise version
4. The way of transport the ink is through the rubber covered roller scraping
5. Adopted a special straight gear drive, Printing size is accuracy
6. It equipped with 3 set of devices, blowing and heating , and the heating adopted center constant temperature control system and group control
7. Low stick with steel processing, And after the special craft processing, and electroplate 3 wire thickness super hard chromium plating of protection
8. Aluminium wheel: enable to oxidation and dynamic and static balance
9. It has equipped with an box which cold air qualitative, it can effectively prevent the ink adhesion defect after printing
10. The printed image is clear, Folding accuracy,high rate of finished products
11. Automatically counter , the machine stop when the material is cut off, automatically transported the ink when the machine stop, but the ink motor automatically stops when printing
12. Overall dimensions:6×2.9×3.5m
13. Weight: 7000 KGS